How to Create Creative Clasps in Jewelry Making with Vintaj


Go to www.beadaholique.com to purchase beading supplies and to get design ideas! Hi I’m Mackie Mullane and I’m a designer
for Vintaj and I’m here today with Beadaholique.com to show you a creative clasp on our My
Journey Necklace and Bracelet I have all of these pieces out. I’ve got two
arrows I’ve got my centerpiece coin for the necklace and part of the toggle that we’re going
to be making also we have three different kinds of jump
rings and two different cut chains. So what you’ll
need is your relief block, a dry paint brush and water. You’re going
to need chain nose pliers filigree shaping pliers and a hole punch pliers okay so first I’m going to do the patina piece I’m just going to get a little bit of the black Black Onyx patina out on the side Apply that to the piece dab it on kind roughly because I want it to look aged, antiqued. I’m gonna take my paper towel and wipe off that top layer So there’s your patina piece next I’m going to assemble the necklace so I’m actually going to be making this
creative hook. So that using this arrow and here at the top I’m actually going
to be twisting the arrow so that when this
comes back up around on this both of the raised edges are
going to be showing take my second of pair chain nose
pliers and twist it around grab on there and twist so I like to make sure I have a nice grip up top and towards the bottom. So once you finish
that step you’ll see that this actually is the back of this side of the arrow and this is the good side of the top. So now we’re going to make it into the hook so here I am going to hold on and I’m going to be shaping it around the large end of the pliers. So I got the end hold on tightly and kinda change edges as you work change sides and twist and pull and then go back to your larger side and
I like to kind of grip and then let go a little bit each time and then grip again as we twist and pull up and then up here I’m going to grab on with both of the pliers and create a little bend in the piece and then you can use your chain nose
pliers once again and bring that loop back up more towards the center then you have your arrow loop. I like to go in with a relief block the light side of it and just add a nice a finish and highlight to the
piece okay so now that you have those two
pieces done, we’re gonna go ahead and finish up that necklace so here I am taking a smaller jump ring
that we have and attach that to the end of the loop that we just made and then
I’m going to actually use the flush cutters and clip off the extra small loop run that through the chain close it up there’s one clip the other small off. Open the small jump ring string it through and go ahead and close
that because you’re going to be stringing the larger jump ring through both ends of this So now take a medium size jump ring straight through the top of the pendant and close and then take your large thick jump
ring open it string it through, go on your jump ring end of the chain. Use both of your chain nose pliers to close and then you have your creative clasp of your necklace so now that we have the necklace made we’re going to go ahead and show you how to finish up that bracelet okay so here I pre-cut a standard length of bracelet which is about seven and a half inches then here we’re going to open this jump ring string it through the under the chain string it through the toggle end attach. Take my hole punching pliers I am going to go right on the center of this arrow so
I’m gonna punch through the back side it’s always easier to get a grip on it
when you’re on the debossed side. Punch that and you can see kinda as I punch that, I
kind of bent the piece I’m going to take my chain nose pliers and just straighten that out and I’m going to take this medium-sized
jump ring, attach it to one end of the chain string it through the arrow, close it and then I’m going to take this nice
little finished leaf and add it to the end of the arrow open up a jump ring string it through and add it to your arrow and then you have your bracelet. Go to www.beadaholique.com to purchase beading supplies and to get design ideas!

3 Comments

Add a Comment

Your email address will not be published. Required fields are marked *