How to make TAFFY TWIST bracelet with two forks. Without loom. rubber band bracelet. Tutorial diy.


HELLO! Welcome to my channel I’ll teach you how to make a bracelet using two forks as loom The bracelet is called Taffy twist I will use the following materials colorful rubber bands two forks a stick or toothpick and tape I’ll take two forks to make the loom I put them in this position once placed I take a piece of tape and I glue the two forks up here I stick the tape around I’ll put tape and I glue it so it does not move and I already have prepared the loom and I already have prepared the loom I grab the loom and a black rubber band I hooked on a fork I turn figure 8
and I hooked the other fork It is thus I grab another black rubber band and I hooked at both tips of the right fork at both tips of the right fork and at both tips of the left of the other fork and now I take one black rubber band I hooked at both tips of the left fork at both tips of the right of the other fork Now, I take the stick or toothpick Now, I take the stick or toothpick I will release the black rubber band of bottom part. I put the stick between the rubber band and fork and I take the rubber band and I leave in the middle of the two forks At the other fork I do the same. I pull the rubber band of bottom part I take out and I leave between the two forks like this Now I take a red rubber band a pink rubber band and a blue rubber band, the three together I turn the rubber bands in a figure 8 I hook these at both ends of the left fork The three rubber bands together I turn the three rubber bands figure 8 and I hooked in the other two tips of the right of the fork Thus and I put the rubber bans under the black rubber band I put the rubber bands under the black rubber band I stretch down to these are placed under the black rubber bands above the colorful rubber bands Thus Now I take a black rubber band and I hooked at both tips of the left and both tips of the other fork on the other side and both tips of the other fork on the other side like this and now I take another black rubber band and I hooked at both tips of the right and at both tips of the left of the other fork and, then, I take the stick or toothpick and again I will remove the black rubber band that is in the middle I pass the stick between the holder and the rubber band I stretch and take up above inwards, between the two forks I take the black rubber on the right too and I do the same I put the stick between the fork and the black rubber band and I hook the rubber band and I stretch and I placed in the middle between the two forks I take the three colors rubber bands left Rubber bands that are hooked on both tips of the left I put the stick between the fork and the three rubber bands and I stretch I take them out above and I placed between two forks I hooked three rubber bands that are at both tips of the right I insert the stick or toothpick like this and I placed between two forks and on this side I hook also the two rubber bands below and I placed between two forks two rubber bands, the right and left and continue Now, I to take three colored rubber bands again one red, one pink and one blue and I repeat the same steps I hooked the three rubber bands on the fork at both tips of the left I turn in the figure 8 and, I hooked the rubber bands, also at both tips of the right and now I take one black rubber band Before this I have to put the colored rubber bands below black rubber bands so that the black rubber band are above and the other three colored rubber bands below I put another black rubber band on the left and a rubber band on the right and I get this black rubber band below the rubber band is between three colors rubber bands and now I placed black and placed it between the two forks and I hooked one black rubber band that is on the right and I do the same I turned and I unhook the two black rubber bands acrossI the order of the steps that you follow no matter and now I unhook the three colorful rubber bands inwards and I have already placed other rubber bands and noI take three rubber bandsw I’ll do the same again or three different colors the hooked at both tips of the left I twist in the form of 8 and I hooked at both tips of the right I hooked a black rubber band between the two forks at both tips of one side and both tips of the other side that you must not forget that the colorful rubber bands have to be under the black rubber band I place them so ther colorful rubber bands are under the black now I get the black rubber band and I placed it between the two forks and on this side I do the same It is thus rubber bands colors have to be under and I put the black rubber band between the two forks I now unhook the rubber bands colors You have to follow this order This requires that bracelet is well made and this side and now on the other fork I unhooked below black rubber bands, as before in the same way. Again I do the same I take three colorful rubber bands I get into the tips of the two left I turn figure 8 I get into the two tips of the right They have to be placed under the black I put up the black colorful rubber bands have to be below the black In this position In this position I now place a black rubber band on the left and a rubber band placed it right and I get the black rubber band below and placed in the middle I get the black rubber band that is in the center of the other side and I placed in the middle Now I can unhook the three colorful rubber bands and place them between the two forks alike as previously I explained I turn the loom and I unhook the two black rubber bands below and I stand between the two forks with the help of stick or toothpick I will stretch the bracelet to this side You can see as it is being made As the steps we have to follow are the same, I’ll do it and I finish I explain what we do next. When it is already far we want. You can leave it to you as you want I’ll take one black rubber band I’ll hook in the two forks and I’ll unhook the black rubber bands below those on the left side I Stand between the two forks and turn the loom and do the same elsewhere. I placed them between the two forks I’m taking now the rubber band is at the two tips of the left and I hooked at both tips of the fork on the other side. This will hook the rubber band, too, in the two tips across the other fork I unhook the black rubber band that are below and I placed between two forks and now the rubber band that is hooked to the left and I’m going to hook on both tips on the right side II now I take the rubber band that is below
and placed between two forks I now I take the rubber band that has been with stick or toothpick and unhook Bracelet The bracelet is finished Now, to close you can use a ring, clip or tie it with other rubber band As you prefer Now I take the black rubber band on one side which is at the end Thus I take and grabbed the black rubber band across I stretch the two rubber bands so with fingers and I’ll close with another bracelet black rubber band I introduce by below two rubber bands I grabbed the rubber band on both sides and now the stretch on one side and now the stretch on one side I stretch, fingers and step above the other side of the rubber band above the other side of the rubber band and I stretch to the rubber band is tied with a knot and the bracelet is tied Now I’m going to put rubber bands to seat The twist and black rubber bands I stretched thus black rubbers bands to the sides must stay centered rubber bands colors and the bracelet is finished and the bracelet is finished I’m going to wear bracelet so you can see how you left I hope you liked it. A greeting.Until the next tutorial end

97 Comments

Add a Comment

Your email address will not be published. Required fields are marked *